FAQ from our live chat in regards to Propagation.
Post Reply
User avatar
Site Admin
Posts: 74
Joined: Tue Apr 14, 2015 7:36 pm
Location: Adelaide Australia

Tue Aug 09, 2016 11:42 am


What is cloning...

Cloning is a method of taking a cutting (a branch or growing portion of the plant, generally with some small leaves to aid growth) of one plant, placing it in a medium, and forcing it to take on roots of its own through the use of rooting hormones. This cutting then becomes a plant of its own but retains identical properties to the plant from which the clone was taken.

Cloning gives the grower the ultimate level of control over the growing process because, unlike seeds, the grower knows what the plant will grow to in the end. Cuttings retain the DNA of the parent plant, so by selecting plants that are most productive, disease resistant, and most healthy the grower can insure a uniform garden of only the best plants.

Growing from seeds is another matter altogether, for more than 30-60% of seeds grow up to represent the worst characteristics of their species. Seeds also take more time to start and grow; with clones you start with a prebuilt plant and the only requirements after cutting is the application of rooting hormones and regular plant maintenance.

The first consideration when cloning a plant is the selection of a viable parent plant from which to take the clones. This plant should be at least 2 months old and exhibit the positive characteristics you desire in the finished plant. The next thing that is needed is a rooting hormone. Rooting hormones are available in liquid, powder, and gel forms. You see, when a plant is cut the wounding at the cut edges stimulates some cells to start dividing and continue to grow but in an unstructured manner, giving rise to globs of tissue called calluses (singular = callus). You can see callus formed naturally on the cut base of a carrot, cauliflower, or cabbage kept for a few weeks in the cupboard. The callus cells have lost many of the specialized features that their parent cells had in the plant. The addition of plant growth hormones to these callused areas causes many areas on the callus to begin the formation of tiny shoots. Gel-type rooting hormones are the preferred choice of growers as they remain on the cutting in an evenly distributed manner providing for better stem penetration and consistent results.

You will also need a piece of screen or shade cloth if necessary to protect your clones from intense light for their first few days. New Clones are exceedingly sensitive to light for their first few days (until they begin to form roots). They will also require foliar feeding via a water spray bottle. In their first few days it is critical that you spray the leaves of your clones with water about 4-5 times a day to supply the water that is unable to be supplied by the roots. Just spray with a fine layer of mist to keep the leaves from dehydrating. Use of a starter tray and a humidity dome can help you to keep your plants moist with less frequent spraying.

Also needed is an extremely sharp, sterile razor blade to cut your clipping and remove excess foliage, a glass of fresh, lukewarm water, a container(filled with the planting mix or grow medium of your choice in which to transfer your new clone). If your growing medium does not already have a hole, you will need to make one with a pencil, etc. to receive your clone. You are now prepared to take your first clone.
Image How do i clone a plant...

Cloning a plant is a very simple process! As stated above, you will need a sterile razor blade, cloning hormone, some lukewarm water, and your final, prepared growing medium. Rockwool cubes will need a hole, and should be pre-soaked, Cyco Ryzofuel is ideal for this.

1. After selecting the plant and preparing the materials per the above instructions, select which shoot you would like to clone. The ideal shoot will be 2″-4″ long and have some leaves to provide photo synthesis during rooting.

2. Remove the bottom two leaves. Cut the stems off at an angle closely to the main stem. A 45° angle insures a larger surface area for the forming of calluses that roots grow from.

3. Cut the main stem directly below the area where you’ve removed the two leaves. Once again, cut this stem at a 45° angle.

4. Apply rooting hormone to and above the fresh cut area, per the instructions on the package.

5. If you are growing your plant in soil it is a good idea to place the shoot in some lukewarm water until you see the roots begin to form. When they are 1 1/2″ – 2″ long the plant will be ready to transplant into the soil.

6. If you are using rockwool or other hydroponic media, move the plant directly into your preferred grow media directly after applying the rooting hormone.

7. Humidity, warmth and low-level light (like fluorescent) are essential to rooting plants. A seed starter tray and humidity dome are a good way to provide an acceptable cloning environment. In a cooler environment, a propagation heat mat can do the job of keeping your shoot’s rooting area at 75°-80° Fahrenheit.

8. If you are using the above method during rooting then you will need to keep your rockwool cubes moist, however not thoroughly soaked. Depending on how fast your plants use the water, and how fast the water evaporates, you may need to water your plants up to several times a day. A light fungicide such as hydroguard won’t hurt.

9. If the last two steps sound a bit daunting, you could always go with the sure-fire method of using an automatic cloning machine. With the Cloning Systems you will get much better success rates and much faster rooting times. Just stick the clone in the machine while it sprays cloning solution in a finely oxygenated mist directly onto the freshly made cuts.
Image -------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Grower: For cloning and starts do you have a starts kit or system? We have never seen one and would prefer all cyco product thru out. What would you suggest if not from clone gel to root juice

Cyco Tech: Mix a solution of Ryzofuel and B1 Boost the thiamine in the b1 boost amplifies the effect of the hormones in the Ryzofuel naturally it will root quite fast You don't need a gel if you soak your plugs in Ryzofuel, Ryzofuel is filled with auxins and cytokinens it will permeate the cutting nub Ryzofuel is a great product use all the way through week 2 in flowering at 2ml per gallon.


Grower: for sprouting should i be using them at full strength, half or quarter strength per liter, the ryzofuel and b1 boost

Cyco Tech: Id go half on b1 and full on ryzo initially. Then after that, full strength on both once you see true leaves. Feed after that should be in medium (y)


Posts: 1
Joined: Wed May 13, 2020 1:40 pm

Thu May 14, 2020 9:02 pm

A cycad platinum series is offered here on this forum for the buyers and all patent rights for the hollers. All the tenets of the platinum and dissertation writing service Uk are evacuated for future items. The forum of the platinum is a series of good and amazing products for the field and chips for the turns.
Post Reply